Balboa 3.0KW Heater M7 GS100 (or BP200)
Description du produit
Balboa 3.0kW Heater M7 – Remote Spa Heater
The Balboa 3.0kW Heater M7 is primarily designed for use with the GS100 control system but is also compatible with BP200 control boxes. This heater provides powerful water heating with M7 sensor technology, ensuring precise temperature regulation and operational safety.
Key Features:
- Heating Capacity: 3.0kW
- Voltage: 230V
- Frequency: 50Hz
- Current Draw: 13.0 Amps
- Construction: Incoloy heating element for enhanced durability and corrosion resistance
- Flow Detection: Equipped with M7 sensors at both ends of the heater tube for accurate monitoring
- Plumbing Connections: Designed for 1.5-inch plumbing setups
- Length: Approximately 10 inches
Compatibility:
- Commonly used with GS100 control systems
- Compatible with BP200 control boxes (if cable connector is changed).
Installation Note:
Ensure the heater tube is primed with water before powering on to avoid damage to the element.
Product note: To fit to a BP system the pug will need to be removed to expose the earth live and neutral and have an "I ring" fitted on the live and neutral to anchor this to the BP200 board.
Box Quantity: Sold individually
Attributs du produit
| Marque : Balboa |
| Matériau de l'élément : Incoloy |
| Puissance kW : 3.0kW |
| Type de produit : Tube chauffant commun |
| Longueur du tube : 290mm |
| Référence de taille : 1.5 pouces |
Attributs du produit
| Marque : Balboa |
| Matériau de l'élément : Incoloy |
| Puissance kW : 3.0kW |
| Type de produit : Tube chauffant commun |
| Longueur du tube : 290mm |
| Référence de taille : 1.5 pouces |
Description du produit
Balboa 3.0kW Heater M7 – Remote Spa Heater
The Balboa 3.0kW Heater M7 is primarily designed for use with the GS100 control system but is also compatible with BP200 control boxes. This heater provides powerful water heating with M7 sensor technology, ensuring precise temperature regulation and operational safety.
Key Features:
- Heating Capacity: 3.0kW
- Voltage: 230V
- Frequency: 50Hz
- Current Draw: 13.0 Amps
- Construction: Incoloy heating element for enhanced durability and corrosion resistance
- Flow Detection: Equipped with M7 sensors at both ends of the heater tube for accurate monitoring
- Plumbing Connections: Designed for 1.5-inch plumbing setups
- Length: Approximately 10 inches
Compatibility:
- Commonly used with GS100 control systems
- Compatible with BP200 control boxes (if cable connector is changed).
Installation Note:
Ensure the heater tube is primed with water before powering on to avoid damage to the element.
Product note: To fit to a BP system the pug will need to be removed to expose the earth live and neutral and have an "I ring" fitted on the live and neutral to anchor this to the BP200 board.
Box Quantity: Sold individually